Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : Front bumper

Peugeot 508 - Front bumper

Front Bumper Peugeot 508 (2010-2018 / mk 1)

Peugeot 508 (2010-2018 / MK 1)
Disassembly of the front bumper of the Peugeot 508 MK1
To remove the front bumper of the Peugeot 508, start by unscrewing the screws on the edge of the two front fenders, unhook them and unscrew the screw inside, …Read all…
Posted on 17 September 2024 by ScegliAuto
Peugeot 508 (2010-2018 / MK 1)
Removing the Front Bumper of the Peugeot 508
In this brief and simple guide, remove and replace the front bumper of the Peugeot 508 by following the instructions below. First, open the bonnet of your car …Read all…
Posted on 16 August 2026 by ScegliAuto
Cigarette lighter (2) Alternator (1) Car stereo (6) Battery (10) Transmission (7) Key (12) Timing belt (1) Air conditioner (1) Onboard computer (8) Checks and maintenance (29) Dashboard (1) Brake rotors (1) Rear bench seat (1) Side marker light (1) Headlight (4) Tail light (2) Fog lights (2) Diesel particulate filter (1) Air filter (4) Cabin air filter (6) Diesel fuel filter (3) Parking brake (3) Accessory kit (2) Light bulb (1) Headlight bulb (9) Tail light bulb (1) (1) Handle (4) Power window motor (2) Transmission fluid (1) Clock (9) Door trim panel (14) Front bumper (2) Rear bumper (3) Brake pads (3) Tires (1) Shift knob (2) Fuel pump (1) Car door (2) Power window switch (1) Instrument cluster (2) Radiator (3) Heater core (1) Wheel (1) Fuse box (19) Seat (2) Parking sensors (1) Side mirror (6) AdBlue warning light (11) Warning light – error code (16) (7) Tire pressure warning light (5) Service warning light (63) Fuel cap (2) Thermostat (1) Valve (1) Blower motor (2)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos