Do it yourself
| ||||
|
Peugeot 508 - Brake pads
Peugeot 508 (2010-2018 / MK 1)
How to replace the front brake pads on a Peugeot 508. Today we will see the necessary instructions for disassembling and replacing the front brake pads of the Peugeot 508, in simple and quick steps. First, we lift …read all… Posted on 17 June 2023 by ScegliAuto
Peugeot 508 (2010-2018 / MK 1)
How to replace the front brake pads of a Peugeot 508 Before starting, we will have to lift the front of our Peugeot 508. Let's start by disassembling and removing the front wheel, unscrewing the relative bolts …read all… Posted on 29 February 2024 by ScegliAuto
Peugeot 508 (2010-2018 / MK 1)
Replacement brake pads Peugeot 508 Are the rear pads of the Peugeot 508 worn out and therefore need to be changed? Let's see how they disassemble. We lift the car on a column bridge to the …read all… Posted on 10 December 2023 by ScegliAuto Alternator (1) Car stereo (4) Battery (6) Gearbox (7) Key (4) Timing belt (1) -board computer (12) Checks and maintenance (28) Brake discs (1) Side indicator light (1) Headlight (2) Tail light (1) Air filter (2) Cabin air filter (2) Diesel filter (2) Headlight bulb (7) Rear light bulb (1) Handle (2) Window motor (2) Gear oil (1) Engine oil (1) Door panel (9) Front bumper (1) Rear bumper (2) Brake pads (3) Tires (1) Gear Shift Knob (1) Fuel pump (1) Instrument cluster (6) Fuse box (8) Outside rearview mirror (2) Thermostat (1) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |