Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Pads on Peugeot 508

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Brake pads

Are the rear brake pads on your Peugeot 508 worn out and in need of replacement? Let's see how to remove them. Lift the car on a column lift to the desired height and remove the wheel. Disconnect the caliper from the rear brake. Use a screwdriver to remove the pads from the caliper of the wheel hub, then remove the brake caliper. Fit the new disc and the new pads onto the caliper, then reattach the brake caliper. Tighten all the bolts and refit the wheel. Test the brake pressure on the 508 after installation. Bleed the brake if necessary.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Peugeot 508
How to Replace the Front Brake Pads on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Today, you will see the necessary instructions to remove and replace the front brake pads on a Peugeot 508 in simple and quick steps. First, raise th…
Replacing the Key Battery for the Peugeot 508
Replacing the Key Battery for the Peugeot 508
Peugeot 508 (2018-2026 / MK 2) In this short video, you will see how to replace the battery in the remote key of a Peugeot 508. This tutorial is also valid for other car models tha…
How to Replace the Front Brake Pads on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Before starting, lift the front end of your Peugeot 508. Begin by removing the front wheel, unscrewing the bolts that secure the wheel to the hub. Ne…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos