Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Peugeot 508

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake pads

See other generations:
Video tutorial

Today, you will see the necessary instructions to remove and replace the front brake pads on a Peugeot 508 in simple and quick steps. First, raise the vehicle and remove the front wheel; then unscrew the bolts securing the front brake caliper, located at the back, and remove it from the brake disc.

At this point, remove the old brake pads by pressing the caliper piston to retract it; then clean the caliper of dirt and install the new high-quality brake pads, following the video until the end!


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Replace Rear Brake Discs and Pads on a Peugeot 508 SW
Peugeot 508 (2010-2018 / MK 1) Learn how to remove and replace the rear brake discs along with the pads on a Peugeot 508 SW by following these simple steps. First, lift the vehicle…
How to Replace the Front Brake Pads on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Before starting, lift the front end of your Peugeot 508. Begin by removing the front wheel, unscrewing the bolts that secure the wheel to the hub. Ne…
Replacing the Front Fog Light Bulbs on a Peugeot 508
Replacing the Front Fog Light Bulbs on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Below are the instructions that will allow you to remove and replace the front fog light bulbs on a Peugeot 508. First, move to the side to remove an…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos