Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What Are the Masses Seen on the Brakes of the Peugeot 508?

Model: Peugeot 508 MK 2 - Years 2018-2026
Part: Wheel

The masses highlighted in the video, which the YouTuber inquires about, are not systems for regenerative braking as one might think, because this component is located in the electric motor of the car, which is connected to the wheels. Indeed, when you release the accelerator or brake, the car's kinetic energy is used to turn the electric motor, which in this phase acts as a dynamo. The rotation generates electricity that is sent to the battery to recharge it. Therefore, the small 'masses' we see attached to the brake caliper are positioned to just touch the surface of the disc when they are new, and they squeal with a high-pitched sound when the brake pads are worn out and need replacing: a purely mechanical system that is very effective.

Posted on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of a Peugeot 508 MK2
How to replace the battery of a Peugeot 508 MK2
Peugeot 508 (2018-2026 / MK 2) In this video, we can see how to replace the battery of a Peugeot 508 MK2: we will start by removing the 30 mm Torx screw indicated by the arrow in t…
Where to Find the EOBD Socket on a Peugeot 508 MK1
Where to Find the EOBD Socket on a Peugeot 508 MK1
Peugeot 508 (2010-2018 / MK 1) In this short video, you will see where the EOBD (European On Board Diagnostic) socket is located on the Peugeot 508. The EOBD socket allows you to c…
How can the tire pressure warning light be reset in the Peugeot 508 sw?
How can the tire pressure warning light be reset in the Peugeot 508 sw?
Peugeot 508 (2018-2026 / MK 2) We learn how to reset the tire pressure warning light in the Peugeot 508 sw, focusing on the 2019 series. After the necessary checks on why the warni…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos