Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Rear Brake Discs and Pads on a Peugeot 508 SW

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Brake rotors

Learn how to remove and replace the rear brake discs along with the pads on a Peugeot 508 SW by following these simple steps. First, lift the vehicle at the rear and remove the wheel; then start by removing the protective caps from the bolts and unscrew them using a hex key, as shown in the video. Next, remove the caliper retaining clip and take off the caliper, extracting the brake pads; now unscrew the fixing screws of the caliper bracket to remove it. Finally, remove the brake disc by unscrewing the two hub screws; follow the video to the end for reassembly!

Updated on 7 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing Brake Pads on Peugeot 508
Replacing Brake Pads on Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Are the rear brake pads on your Peugeot 508 worn out and in need of replacement? Let's see how to remove them. Lift the car on a column lift to the d…
Removing the Rear Bumper on a Peugeot 508
Removing the Rear Bumper on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) How do you remove the bumper from your car? This guide shows how to remove the rear bumper from a Peugeot 508. Lift the rear hatch of the car, locate…
Removing the Rear Bumper of the Peugeot 508
Removing the Rear Bumper of the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) In this video tutorial, you will learn how to remove the rear bumper of the Peugeot 508 by following the instructions below. First, open the boot and…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos