Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : Rear bumper

Peugeot 508 - Rear bumper

Rear Bumper Peugeot 508 (2010-2018 / mk 1)

Peugeot 508 (2010-2018 / MK 1)
How to remove the rear bumper of the Peugeot 508 SW
Below are the instructions that will allow us to disassemble and replace the rear bumper of the Peugeot 508 SW, in simple steps. First, we open the rear …Read all…
Posted on 21 August 2025 by ScegliAuto
Peugeot 508 (2010-2018 / MK 1)
Removing the Rear Bumper of the Peugeot 508
In this video tutorial, you will learn how to remove the rear bumper of the Peugeot 508 by following the instructions below. First, open the boot and start by …Read all…
Posted on 24 August 2026 by ScegliAuto
Peugeot 508 (2010-2018 / MK 1)
Removing the Rear Bumper on a Peugeot 508
How do you remove the bumper from your car? This guide shows how to remove the rear bumper from a Peugeot 508. Lift the rear hatch of the car, locate the …Read all…
Posted on 22 May 2026 by ScegliAuto
Cigarette lighter (2) Alternator (1) Car stereo (6) Battery (11) Transmission (7) Key (12) Timing belt (1) Air conditioner (1) Onboard computer (9) Checks and maintenance (29) Dashboard (1) Brake rotors (1) Rear bench seat (1) Side marker light (1) Headlight (4) Tail light (2) Fog lights (2) Diesel particulate filter (1) Air filter (4) Cabin air filter (6) Diesel fuel filter (3) Parking brake (3) Accessory kit (2) Light bulb (1) Headlight bulb (9) Tail light bulb (1) (1) Handle (4) Power window motor (2) Transmission fluid (1) Clock (9) Door trim panel (14) Front bumper (2) Rear bumper (3) Brake pads (3) Tires (1) Shift knob (2) Fuel pump (1) Car door (2) Power window switch (1) Instrument cluster (2) Radiator (3) Heater core (1) Wheel (1) Fuse box (21) Seat (2) Parking sensors (1) Side mirror (6) AdBlue warning light (11) Warning light – error code (16) Tire pressure warning light (13) Service warning light (64) Fuel cap (2) Thermostat (1) Valve (1) Blower motor (2)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos