Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper of the Peugeot 508

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Rear bumper

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the rear bumper of the Peugeot 508 by following the instructions below. First, open the boot and start by removing the rear lights by unscrewing the screw and disconnecting the electrical connectors.

Next, unscrew the screws located on both sides of the wheel arches and underneath the rear bumper, as shown in the video. At this point, gently unclip the bumper from the sides until it is completely removed; then reassemble everything by applying the reverse procedure!


Updated on 16 June 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper on a Peugeot 508
Removing the Rear Bumper on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) How do you remove the bumper from your car? This guide shows how to remove the rear bumper from a Peugeot 508. Lift the rear hatch of the car, locate…
How to remove the rear bumper of the Peugeot 508 SW
How to remove the rear bumper of the Peugeot 508 SW
Peugeot 508 (2010-2018 / MK 1) Below are the instructions that will allow us to disassemble and replace the rear bumper of the Peugeot 508 SW, in simple steps. First, we open the r…
Removing the Front Bumper of the Peugeot 508
Removing the Front Bumper of the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) In this brief and simple guide, remove and replace the front bumper of the Peugeot 508 by following the instructions below. First, open the bonnet of…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos