Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Window Regulator from a Peugeot 508 Door

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Power window motor

See other generations:
Video tutorial

To remove the window regulator mechanism from the front door of this car model, you must first remove the door panel. Start by unclipping the handle cover in the centre of the panel to access the screws underneath, which need to be unscrewed.

Then, disconnect the window switch, unscrew the other screws along the lower edge, and lever along the edges to unclip the pressure clips and complete the removal of the panel by disconnecting the connectors. Next, peel back the soundproofing cover carefully to avoid tearing it, remove the window motor, loosen the glass retaining clips, and unscrew the fixing nuts of the mechanism to extract it from its housing.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel on a Peugeot 508
How to Remove the Rear Door Panel on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) In this short and simple guide, discover the instructions that will allow you to remove the rear door panel on a Peugeot 508. First, open the rear do…
How to Remove the Rear Door Panel on a Peugeot 508
How to Remove the Rear Door Panel on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) How do you remove the left rear door panel of a Peugeot 508? Follow these steps in this video. Before starting the disassembly, disconnect the batter…
How to Replace the Window Regulator on the Peugeot 508
How to Replace the Window Regulator on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) To replace the window regulator on the Peugeot 508, you need to loosen the screws that secure the corresponding door panel so that it can be complete…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos