Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Door Panel on a Peugeot 508

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Door trim panel

How do you remove the left rear door panel of a Peugeot 508? Follow these steps in this video. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Begin the disassembly: use a lever to remove the plastic cover of the door handle, then use a screwdriver to unscrew the fastening screws on the plastic panel. Once all screws are removed, detach the plastic clips that secure the door. Remove the door panel by hand, disconnect any power connectors and release cables. Carry out necessary maintenance on the door by peeling off the adhesive protection.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 508 (2010-2018 / MK 1) In this short and simple guide, discover the instructions that will allow you to remove the rear door panel on a Peugeot 508. First, open the rear do…
Peugeot 508 (2010-2018 / MK 1) The procedure for removing the door panel on the Peugeot 508 is done by levering with an object so that it is possible to detach the trim covering th…
Peugeot 508 (2010-2018 / MK 1) Below are the instructions that will allow us to disassemble and replace the rear bumper of the Peugeot 508 SW, in simple steps. First, we open the r…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos