Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door Panel on Peugeot 508

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

In this video, follow the main instructions to remove the front door panel on a Peugeot 508. First, open the front door and remove the plastic cover found on the handle; then unscrew all the screws underneath using a T30 Torx screwdriver. Next, remove the switch panel by disconnecting the electrical connector at the back, and start prying at the edges of the panel to unclip it; finally, remove it by disconnecting the handle cable, as shown in the video!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel on a Peugeot 508
How to Remove the Rear Door Panel on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) How do you remove the left rear door panel of a Peugeot 508? Follow these steps in this video. Before starting the disassembly, disconnect the batter…
How to Remove the External Door Handle on the Peugeot 508
How to Remove the External Door Handle on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) In this video, you will see the procedure to remove and replace the external door handle on the driver's side of the first series Peugeot 508 in simp…
Replacing the Handle on Peugeot 508
Replacing the Handle on Peugeot 508
Peugeot 508 (2010-2018 / MK 1) How do you remove the handle from inside the door? Here’s how to remove the handle on a Peugeot 508. Open the car door; remove the plastic covering p…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos