Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the door panel in the Peugeot 508?

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Door trim panel

In this tutorial we can see how to remove the door panel in the Peugeot 508, a very simple and quick operation. First of all, we open the door on the side where we will be working, then, using preferably a plastic spatula so as not to leave marks, we unclip the small cap placed on the inner edge and the handle cover. We then unscrew the screws just released with a Torx key, remove both the lower courtesy light and the window switch panel, and, pulling it towards us, separate the panel from the door.

Posted on 15 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 508 (2010-2018 / MK 1) In this short and simple guide, discover the instructions that will allow you to remove the rear door panel on a Peugeot 508. First, open the rear do…
Peugeot 508 (2010-2018 / MK 1) Below are the steps to remove the front door panel and speaker of the Peugeot 508. First, open the front door and start by removing the plastic cover…
Peugeot 508 (2010-2018 / MK 1) The procedure for removing the door panel on the Peugeot 508 is done by levering with an object so that it is possible to detach the trim covering th…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos