Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the window lifter of the Peugeot 508?

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Power window switch

In order to replace the window lifter of the Peugeot 508, you need to loosen the screws that secure the corresponding door panel, so that it can be completely removed: to do this, you will need to unscrew the screws located under the handrail molding, near the inner handle and at the bottom of the panel. Once these screws have been removed, it will be possible to detach the panel and locate the mechanism underneath: this must be freed from the fixing screws and the connectors that regulate its operation, so that the new replacement part can be possibly inserted.

Posted on 28 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Window Regulator on a Peugeot 508?
How to Replace the Window Regulator on a Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) To replace the window regulator on a Peugeot 508, loosen the screws securing the door panel corresponding to the part to be removed. The screws are l…
Replacing the Key Battery for the Peugeot 508
Replacing the Key Battery for the Peugeot 508
Peugeot 508 (2018-2026 / MK 2) In this short video, you will see how to replace the battery in the remote key of a Peugeot 508. This tutorial is also valid for other car models tha…
How to Remove the Rear Door Panel on a Peugeot 508
How to Remove the Rear Door Panel on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) In this short and simple guide, discover the instructions that will allow you to remove the rear door panel on a Peugeot 508. First, open the rear do…

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos