Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulbs in the Peugeot 508?

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the Xenon front bulbs in the Peugeot 508, a very simple and quick operation. First, disconnect the negative terminal of the battery to work safely.

Next, remove the large rear cap of the headlamp and to release the bulb from the holder, push down the lever on the left. At this point, you can extract the bulb from the housing, disconnect the connector using a screwdriver, and install the replacement by following the exact reverse procedure.

Avoid touching the new bulb directly with bare hands.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on the Peugeot 508
How to Replace the Headlight Bulb on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Today, you will learn how to replace the front headlight bulbs on the Peugeot 508. Start by opening the front bonnet. Next, unscrew the screws securi…
Replacing the Front Fog Light Bulbs on a Peugeot 508
Replacing the Front Fog Light Bulbs on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Below are the instructions that will allow you to remove and replace the front fog light bulbs on a Peugeot 508. First, move to the side to remove an…
How to Turn On and Off the Fog Lights of the Peugeot 508
How to Turn On and Off the Fog Lights of the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Today, I will explain how to turn on and off the fog lights of the Peugeot 508. The headlight switch is located on the left stalk of the steering whe…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos