Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Bulb on a Peugeot 508

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

Lift the bonnet and unscrew all the screws securing the upper bumper cover, then remove it. For safety, disconnect the battery terminals and place some cardboard underneath. Replacing the LED Xenon bulb is really simple and within everyone's reach: just unscrew the round rear cover facing the engine bay and remove the old bulb.

The only precaution required is to ensure the new bulb is properly seated when inserting it. Reassemble everything and check its correct operation.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Front Headlight Bulb on the Peugeot 508
Guide to Replacing the Front Headlight Bulb on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) This guide outlines the main steps for removing and replacing the front headlight bulb on the Peugeot 508, following the instructions below. First, o…
How to replace the headlight bulb of the Peugeot 508.
How to replace the headlight bulb of the Peugeot 508.
Peugeot 508 (2010-2018 / MK 1) In this guide, we will look at the main instructions on how to disassemble and replace the low beam headlight bulb of the Peugeot 508. First, let's o…
How to replace the front headlight bulb on the Peugeot 508?
How to replace the front headlight bulb on the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) To replace the front headlight bulb on the Peugeot 508, open the bonnet to access the components inside the engine bay: specifically, you will need t…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos