Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb on the Peugeot 508?

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Headlight bulb

To replace the front headlight bulb on the Peugeot 508, open the bonnet to access the components inside the engine bay: specifically, you will need to reach the inside of the headlight, where you will find the circular protective cover. By removing this cover, you can pull out the bulb from inside, disconnecting the connectors attached to it. At this point, connect the new bulb to the connector, insert it into the corresponding headlight, and close everything with the appropriate cover.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Front Headlight Bulb on the Peugeot 508
Guide to Replacing the Front Headlight Bulb on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) This guide outlines the main steps for removing and replacing the front headlight bulb on the Peugeot 508, following the instructions below. First, o…
How to Replace the Headlight Bulb on a Peugeot 508?
How to Replace the Headlight Bulb on a Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) To replace the headlight bulb on a Peugeot 508, you need to open the bonnet to access the components inside the engine bay: here you will find the in…
How to Replace the Front Headlamp Bulb of the Peugeot 508
How to Replace the Front Headlamp Bulb of the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) This tutorial provides instructions to remove and replace the front headlamp bulb of the Peugeot 508. First, open the bonnet of your car and remove t…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos