Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the AdBlue tank on the Peugeot Boxer 2.0

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: AdBlue warning light

See other generations:
Video tutorial

Today's main steps will show you how to remove and replace the AdBlue tank on the Peugeot Boxer 2.0. First, you need to raise the vehicle and locate the AdBlue tank; then disconnect the various AdBlue pipes (draining the fluid into a container, disconnecting the electrical connector, and unscrewing all the fixing screws of the brackets, as shown in the video).

At this point, install the new AdBlue tank, securing it in the correct position; finally, refill with the new fluid!


Updated on 5 October 2026 by ScegliAuto


Related tutorials

How to Reset the AdBlue Light on the Peugeot Boxer
How to Reset the AdBlue Light on the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) The AdBlue light comes on in the Peugeot Boxer when it is necessary to top up the liquid in the tank. In some vehicles, the reset occurs automaticall…
What Does the AdBlue Warning Light Mean in a Peugeot Boxer Van and How to Remove It?
What Does the AdBlue Warning Light Mean in a Peugeot Boxer Van and How to Remove It?
Peugeot Boxer (2006-2024 / MK 2) If the AdBlue warning light has illuminated on the dashboard of your Peugeot Boxer van, it means that the emissions fluid has reached a too low level…
How to reset the urea "AdBlue" warning light on a Peugeot Boxer?
How to reset the urea "AdBlue" warning light on a Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) Good morning and welcome back to Scegliauto.com! Today's objective is to reset the "AdBlue" warning light on our Peugeot Partner. Note: before perfor…

    Frequently Asked Questions

    • Boxer 2006-2024 - AdBlue warning light on in the Peugeot Boxer, what to do? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos