Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the urea "AdBlue" warning light on a Peugeot Boxer?

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: AdBlue warning light

See other generations:
Video tutorial

Good morning and welcome back to Scegliauto.com! Today's objective is to reset the "AdBlue" warning light on our Peugeot Partner. Note: before performing the reset, ensure that AdBlue has been refilled.

Start by sitting in the driver's seat. Next, turn the key to switch on the instrument panel without starting the van. At this point, connect the diagnostic device to the OBD port.

Once done, navigate to "Malfunctions" and press reset on the "Check AdBlue" option, and you will have completed the reset.


Updated on 29 October 2026 by ScegliAuto


Related tutorials

How to replace the AdBlue tank on the Peugeot Boxer 2.0
How to replace the AdBlue tank on the Peugeot Boxer 2.0
Peugeot Boxer (2006-2024 / MK 2) Today's main steps will show you how to remove and replace the AdBlue tank on the Peugeot Boxer 2.0. First, you need to raise the vehicle and locate …
How to Reset the AdBlue Warning Light on a Peugeot Boxer
How to Reset the AdBlue Warning Light on a Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. …
How to Reset the AdBlue Light on the Peugeot Boxer
How to Reset the AdBlue Light on the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) The AdBlue light comes on in the Peugeot Boxer when it is necessary to top up the liquid in the tank. In some vehicles, the reset occurs automaticall…

    Frequently Asked Questions

    • Boxer 2006-2024 - AdBlue warning light on in the Peugeot Boxer, what to do? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos