Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Light on the Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: AdBlue warning light

See other generations:
Video tutorial

The AdBlue light comes on in the Peugeot Boxer when it is necessary to top up the liquid in the tank. In some vehicles, the reset occurs automatically when the vehicle is started immediately after topping up, while in others, such as the Peugeot, it is necessary to reset it via the diagnostic computer and the OBD port.

Connect the plug to the computer and select the car model and the maintenance and reset section. Select the item you wish to reset and wait for the reset to load.

Once finished, turn off and restart the vehicle, then disconnect the computer.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

How to Reset the AdBlue Warning Light on a Peugeot Boxer
How to Reset the AdBlue Warning Light on a Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. …
How to replace the AdBlue tank on the Peugeot Boxer 2.0
How to replace the AdBlue tank on the Peugeot Boxer 2.0
Peugeot Boxer (2006-2024 / MK 2) Today's main steps will show you how to remove and replace the AdBlue tank on the Peugeot Boxer 2.0. First, you need to raise the vehicle and locate …
How to reset the urea "AdBlue" warning light on a Peugeot Boxer?
How to reset the urea "AdBlue" warning light on a Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) Good morning and welcome back to Scegliauto.com! Today's objective is to reset the "AdBlue" warning light on our Peugeot Partner. Note: before perfor…

    Frequently Asked Questions

    • Boxer 2006-2024 - AdBlue warning light on in the Peugeot Boxer, what to do? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos