Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery on a Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

The battery for the remote on the Peugeot Boxer is located inside a designated compartment in the remote body. This needs to be extracted to replace the key, and for this, you will need a small flat screwdriver.

Once you have it, use it to slightly unscrew the screw holding the battery cover in place, then remove the cover using the screwdriver as a lever. Once the compartment is removed, you can take out the battery and replace it with a new one, then reposition the battery housing inside the remote and tighten the screw again.


Posted on 11 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery of the Peugeot Boxer
How to Replace the Key Fob Battery of the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) In these brief and simple steps, learn how to disassemble and replace the battery of the key fob for the Peugeot Boxer, as well as the Fiat Ducato. F…
Replacing the Remote Battery for the Peugeot Boxer
Replacing the Remote Battery for the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) The remote that opens and closes the doors of the Peugeot Boxer is powered by a CR2032 battery, which depletes over time and use: when this happens, …
How to Replace the Battery in the Peugeot Boxer Key
How to Replace the Battery in the Peugeot Boxer Key
Peugeot Boxer (2006-2024 / MK 2) Replacing the battery in the smart key of the Peugeot Boxer is undoubtedly one of the simplest and quickest maintenance tasks you can perform yoursel…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos