Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Identify and Replace the Battery in a Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Battery

See other generations:
Video tutorial

This guide shows how to locate and replace the battery in a Peugeot Boxer. The battery is located in a designated compartment inside the cabin, under the driver's footwell.

Access the battery by unscrewing the four retaining screws at the corners of the cover and lifting the piece upwards. At this point, use an Allen key to unscrew the fixing screw of the battery bracket and remove it. Disconnect the negative terminal using the appropriate lever and the positive terminal after removing the plastic cover, the two screws of the red plate, and loosening the connector bolt; you can then extract the battery.

Be careful not to damage any cables. Replace the battery in the same way. Reattach the terminal connectors, the fixing bracket, and finally the drainage tube.

This should be inserted into the hole on the battery and the hole on the floor of the compartment.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

How to replace the starter motor on a Peugeot Boxer
How to replace the starter motor on a Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) The instructions in this guide will show you the procedure for removing and replacing the starter motor on a Peugeot Boxer, as well as on a Fiat Duca…
How to Replace the Battery on the Peugeot Boxer
How to Replace the Battery on the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) To replace the battery on this vehicle model, follow the instructions and information provided in the video and description below. The battery is loc…
How to Replace the Front Headlamp Bulb on the Peugeot Boxer 2015
How to Replace the Front Headlamp Bulb on the Peugeot Boxer 2015
Peugeot Boxer (2006-2024 / MK 2) If you own a Peugeot Boxer second series (2015) and want to learn how to replace the front headlamp bulb, just carefully read the instructions below …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos