Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on the Peugeot Boxer 2015

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

If you own a Peugeot Boxer second series (2015) and want to learn how to replace the front headlamp bulb, just carefully read the instructions below and put them into practice. First, switch off your Peugeot Boxer and lift the front bonnet.

At this point, remove the panel located at the bottom of the engine bay and locate the protective cap situated at the rear of the headlamp. Next, remove this cap and proceed to replace the faulty bulb with a new one.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on Peugeot Boxer and Fiat Ducato
How to Replace the Front Headlamp Bulb on Peugeot Boxer and Fiat Ducato
Peugeot Boxer (2006-2024 / MK 2) Replacing the front headlamp bulb on a Peugeot Boxer or Fiat Ducato is a straightforward task you can do yourself, especially with our brief video tu…
How to Replace the Front Headlamp Bulb on the Peugeot Boxer
How to Replace the Front Headlamp Bulb on the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) Today's guide will illustrate the steps to remove and replace the front headlamp bulb on the Peugeot Boxer. First, open the bonnet of the vehicle and…
How to Replace the Headlight Bulb on a Peugeot Boxer
How to Replace the Headlight Bulb on a Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) Are the headlight bulbs due for replacement? Let's see how to change the bulbs on a Peugeot Boxer. Lift the front bonnet and locate the back of the f…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos