Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. Boxer
  6. : How to replace the front headlight bulb of the Peugeot Boxer.

Peugeot Boxer - Video tutorial

Model: Peugeot Boxer MK 2 - Years 2006-2023
Part: Headlight bulb
Operation: How to replace the front headlight bulb of the Peugeot Boxer.

Today's guide will show us the steps that will allow us to disassemble and replace the front headlight bulb of the Peugeot Boxer. First of all, we open the vehicle's engine hood and start unscrewing the fastening screws that we find on the upper part of the headlight assembly, in order to remove it; then we remove the plastic cover to access the bulbs, disconnecting the electrical connector and releasing the metal clip to remove the low beam bulb. At this point, we install the new bulb and reattach the front headlight assembly, following the reverse procedure!


Posted on 9 February 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos