Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight on a Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years 2006-2024
Part: Headlight

To replace the front headlight on a second-generation Peugeot Boxer, produced from 2006 to 2022, first open the bonnet of the vehicle. Next, disconnect the various bulb wiring from the back of the headlight. Once done, unscrew the two screws holding the headlight in place using a Torx spanner, as shown in the video tutorial. Then, push the headlight inward to remove it from its housing and finally take it out completely. Once the old front headlight is removed, install a new one by following the reverse procedure.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on the Peugeot Boxer 2015
How to Replace the Front Headlamp Bulb on the Peugeot Boxer 2015
Peugeot Boxer (2006-2024 / MK 2) If you own a Peugeot Boxer second series (2015) and want to learn how to replace the front headlamp bulb, just carefully read the instructions below …
How to Replace the Front Headlamp Bulb on a Peugeot Boxer 2
Peugeot Boxer (2006-2024 / MK 2) If one of the front headlamp bulbs on your Peugeot Boxer Mk2 (2006-2022) is no longer working and you want to learn how to replace it quickly and saf…
Replacement of Dipped Beam Bulb for Peugeot Boxer
Replacement of Dipped Beam Bulb for Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) If the dipped beam bulb of the Peugeot Boxer has blown, replace it as soon as possible. Open the bonnet and position yourself in front of the headlam…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos