Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Dipped Beam Bulb for Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years 2006-2024

If the dipped beam bulb of the Peugeot Boxer has blown, replace it as soon as possible. Open the bonnet and position yourself in front of the headlamp containing the burnt bulb. Unscrew the two fixing screws and release the headlamp unit from its housing. Unclip the metal clips that secure the rear cover. Disconnect the electrical connector and unclip the metal wire retaining the bulb. Replace it with a new one, taking care not to touch the glass bulb with bare fingers, and place it back in its housing, ensuring correct positioning. Reassemble everything by reversing the previous steps.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on the Peugeot Boxer
How to Replace the Front Headlamp Bulb on the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) Today's guide will illustrate the steps to remove and replace the front headlamp bulb on the Peugeot Boxer. First, open the bonnet of the vehicle and…
How to Replace the Mirror Bulb on a Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) To replace the mirror bulb on a Peugeot Boxer, use a tool to lever out the glass from the inside of the corresponding housing; once the glass is deta…
How to Replace the Front Headlamp Bulb on the Peugeot Boxer 2015
How to Replace the Front Headlamp Bulb on the Peugeot Boxer 2015
Peugeot Boxer (2006-2024 / MK 2) If you own a Peugeot Boxer second series (2015) and want to learn how to replace the front headlamp bulb, just carefully read the instructions below …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos