Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Boxer
    4. : Headlight

Peugeot Boxer - Headlight

Headlight Peugeot Boxer (2006-2024 / mk 2)

Peugeot Boxer (2006-2024 / MK 2)
How to Remove the Front Headlamp of the 2018 Peugeot Boxer
If one of the front headlamps of your second series Peugeot Boxer (2018) has stopped working or is damaged, follow the procedure described below to remove it …Read all…
Posted on 24 October 2026 by ScegliAuto
Peugeot Boxer (2006-2024 / MK 2)
Replacing the Headlight on a Peugeot Boxer
To replace the front headlight on a second-generation Peugeot Boxer, produced from 2006 to 2022, first open the bonnet of the vehicle. Next, disconnect the …Read all…
Posted on 7 September 2026 by ScegliAuto
Shocks (3) Car stereo (2) Battery (3) Transmission (1) Glow plugs (3) Body (2) Key (5) Timing belt (4) Onboard computer (1) Checks and maintenance (13) Headlight (2) Tail light (1) Air filter (1) Cabin air filter (6) Diesel fuel filter (2) Clutch (5) Grille (1) Light bulb (1) Side marker bulb (2) Headlight bulb (6) Tail light bulb (1) License plate light (1) Engine (2) Power window motor (1) Starter motor (2) Engine oil (4) Clock (8) Door trim panel (1) Rear bumper (1) Pump (1) Fuel pump (2) Car door (1) Instrument cluster (2) Radiator (2) Wheel (2) Fuse box (36) Seat (1) Suspension system (2) Side mirror (8) AdBlue warning light (5) Warning light – error code (8) Tire pressure warning light (1) Service warning light (46) Windshield wipers (2) Valve (1) EGR valve (4)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos