Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Boxer
    4. : -board computer

Peugeot Boxer - -board computer

Peugeot Boxer (2006-2023 / MK 2)
How to reset the oil change service on Peugeot Boxer 3
Open the door on the driver's side and access the driver's seat. In order to cancel the maintenance intervention signal, it is necessary to insert the key in …read all…
Posted on 10 October 2022 by ScegliAuto
Peugeot Boxer (2006-2023 / MK 2)
How to reset the service on the Peugeot Boxer 2020
After carrying out the oil change service and relative filter on your car we must proceed to reset the service warning light on the instrument panel, to do …read all…
Posted on 14 May 2024 by ScegliAuto
Peugeot Boxer (2006-2023 / MK 2)
How to reset the Peugeot Boxer service light
Resetting the Peugeot Boxer Mk2 service light requires a very simple and quick procedure. For this reason it can be performed without any kind of problem by …read all…
Posted on 22 April 2024 by ScegliAuto
Peugeot Boxer (2006-2023 / MK 2)
How to reset the Peugeot Boxer service
In today's video we see how to reset the Peugeot Boxer service warning light (but this video also applies to the Citroen Jumper and Fiat Ducato twins). We …read all…
Posted on 7 April 2024 by ScegliAuto
Peugeot Boxer (2006-2023 / MK 2)
How to set the time of a Peugeot Boxer
Before we can start, we will have to go and sit in the driver's seat of our Peugeot Boxer. So let's start by activating the instrument panel by turning the key …read all…
Posted on 11 February 2024 by ScegliAuto
Shock absorbers (2) Car stereo (1) Battery (3) Glow plugs (1) Key (1) Timing belt (1) -board computer (5) Checks and maintenance (27) Headlight (1) Air filter (1) Cabin air filter (2) Diesel filter (1) Clutch (3) Grille (1) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (1) License plate light (1) Window motor (1) Starter motor (2) Engine oil (1) Door panel (1) Rear bumper (1) Pump (1) Fuel pump (1) Instrument cluster (9) Radiator (1) Wheel (2) Fuse box (19) Suspensions (1) Outside rearview mirror (6) Windscreen wipers (1) Valve (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos