Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Boxer
    4. : Suspensions

Peugeot Boxer - Suspensions

Peugeot Boxer (2006-2023 / MK 2)
How to replace the front suspensions of Peugeot Boxer - Fiat Ducato.
In this guide, we will see how to disassemble and replace the front suspensions of the Peugeot Boxer, as well as the Fiat Ducato, following the instructions …read all…
Posted on 13 December 2023 by ScegliAuto
Shock absorbers (2) Car stereo (1) Battery (3) Glow plugs (1) Key (1) Timing belt (1) -board computer (5) Checks and maintenance (27) Headlight (1) Air filter (1) Cabin air filter (2) Diesel filter (1) Clutch (3) Grille (1) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (1) License plate light (1) Window motor (1) Starter motor (2) Engine oil (1) Door panel (1) Rear bumper (1) Pump (1) Fuel pump (1) Instrument cluster (9) Radiator (1) Wheel (2) Fuse box (19) Suspensions (1) Outside rearview mirror (6) Windscreen wipers (1) Valve (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos