Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Boxer
    4. : Clutch

Peugeot Boxer - Clutch

Peugeot Boxer (1993-2006 / MK 1)
How do you replace the clutch of the Peugeot Boxer?
To replace the clutch on the Peugeot Boxer, it is necessary to loosen the screws that secure the gearbox to its housing: the gearbox can be removed by …read all…
Posted on 24 April 2024 by ScegliAuto
Peugeot Boxer (1993-2006 / MK 1)
How do you replace the clutch of the Peugeot Boxer?
The procedure for replacing the clutch of the Peugeot Boxer involves loosening the screws that fix the gearbox to its housing: the gearbox can be removed by …read all…
Posted on 15 March 2024 by ScegliAuto
Peugeot Boxer (2006-2023 / MK 2)
How do you replace the Peugeot Boxer clutch?
To be able to replace the Peugeot Boxer clutch, you need to loosen the screws that fix the gearbox to its housing: this can be removed by unscrewing the screws …read all…
Posted on 4 June 2023 by ScegliAuto
Shock absorbers (2) Car stereo (1) Battery (3) Glow plugs (1) Key (1) Timing belt (1) -board computer (5) Checks and maintenance (27) Headlight (1) Air filter (1) Cabin air filter (2) Diesel filter (1) Clutch (3) Grille (1) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (1) License plate light (1) Window motor (1) Starter motor (2) Engine oil (1) Door panel (1) Rear bumper (1) Pump (1) Fuel pump (1) Instrument cluster (9) Radiator (1) Wheel (2) Fuse box (19) Suspensions (1) Outside rearview mirror (6) Windscreen wipers (1) Valve (1) EGR valve (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos