Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Boxer
    4. : EGR valve

Peugeot Boxer - EGR valve

EGR Valve Peugeot Boxer (2006-2024 / mk 2)

Peugeot Boxer (2006-2024 / MK 2)
A McGyver Solution for a Broken EGR Valve in the Middle of Nowhere
This is truly a McGyver solution, but it requires at least a Torx T30, a 10 mm socket, a long 13 mm socket, and pliers, along with a piece of steel and two …Read all…
Posted on 28 April 2026 by ScegliAuto
Peugeot Boxer (2006-2024 / MK 2)
Replacement of the EGR valve on Peugeot Boxer
Let's see how to replace the EGR valve on a Peugeot Boxer that gives us a slow response from the accelerator, especially when releasing and pressing the pedal. …Read all…
Posted on 1 October 2025 by ScegliAuto
Peugeot Boxer (2006-2024 / MK 2)
How do you replace the EGR valve of the Peugeot Boxer?
In order to replace the EGR valve of the Peugeot Boxer, you will need to open the hood to access the components located inside the engine compartment: the EGR …Read all…
Posted on 18 February 2025 by ScegliAuto
Peugeot Boxer (2006-2024 / MK 2)
Removing the EGR Valve on a Peugeot Boxer - Fiat Ducato 2.2 Diesel
In this video, we will see how to remove the EGR valve on a Peugeot Boxer 2.2 HDI, as well as on a Fiat Ducato with the same engine. First, open the bonnet of …Read all…
Posted on 17 May 2026 by ScegliAuto
Shocks (3) Car stereo (2) Battery (3) Transmission (1) Glow plugs (3) Body (2) Key (5) Timing belt (4) Onboard computer (1) Checks and maintenance (13) Headlight (2) Tail light (1) Air filter (1) Cabin air filter (6) Diesel fuel filter (2) Clutch (5) Grille (1) Light bulb (1) Side marker bulb (2) Headlight bulb (6) Tail light bulb (1) License plate light (1) Engine (2) Power window motor (1) Starter motor (2) Engine oil (4) Clock (8) Door trim panel (1) Rear bumper (1) Pump (1) Fuel pump (2) Car door (1) Instrument cluster (2) Radiator (2) Wheel (2) Fuse box (36) Seat (1) Suspension system (2) Side mirror (8) AdBlue warning light (5) Warning light – error code (8) Tire pressure warning light (1) Service warning light (46) Windshield wipers (2) Valve (1) EGR valve (4)

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos