Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the EGR valve of the Peugeot Boxer?

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: EGR valve

See other generations:
Video tutorial

In order to replace the EGR valve of the Peugeot Boxer, you will need to open the hood to access the components located inside the engine compartment: the EGR valve will be positioned in the part that is located immediately below the exhaust manifold.

You will need to loosen the screws that hold it to its housing and disconnect the connectors that are attached to it: at this point it will be possible to remove it from its seat to insert the new one. After installation, you will need to reconnect the connectors to verify that everything is functioning correctly.


Posted on 18 February 2025 by ScegliAuto


Related tutorials

Removing the EGR Valve on a Peugeot Boxer - Fiat Ducato 2.2 Diesel
Removing the EGR Valve on a Peugeot Boxer - Fiat Ducato 2.2 Diesel
Peugeot Boxer (2006-2024 / MK 2) In this video, we will see how to remove the EGR valve on a Peugeot Boxer 2.2 HDI, as well as on a Fiat Ducato with the same engine. First, open the …
How to Replace the EGR Valve on the Peugeot Boxer
How to Replace the EGR Valve on the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) To replace the EGR valve on the Peugeot Boxer, loosen the screws securing the front bumper at the front of the vehicle so that the bumper can be comp…
Replacement of the EGR valve on Peugeot Boxer
Replacement of the EGR valve on Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) Let's see how to replace the EGR valve on a Peugeot Boxer that gives us a slow response from the accelerator, especially when releasing and pressing …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos