Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the EGR Valve on the Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Valve

See other generations:
Video tutorial

To replace the EGR valve on the Peugeot Boxer, loosen the screws securing the front bumper at the front of the vehicle so that the bumper can be completely removed. After removing the bumper, perform the same operation with the grille to access the radiator.

The radiator can be moved by loosening the screws that secure it to its rear support. Behind it, you will find the EGR valve, located between the intake manifold and the exhaust manifold; by unscrewing the screws and disconnecting the connectors, you can remove the old valve and replace it with a new one.


Updated on 10 July 2026 by ScegliAuto


Related tutorials

How do you replace the EGR valve of the Peugeot Boxer?
How do you replace the EGR valve of the Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) In order to replace the EGR valve of the Peugeot Boxer, you will need to open the hood to access the components located inside the engine compartment…
Removing the EGR Valve on a Peugeot Boxer - Fiat Ducato 2.2 Diesel
Removing the EGR Valve on a Peugeot Boxer - Fiat Ducato 2.2 Diesel
Peugeot Boxer (2006-2024 / MK 2) In this video, we will see how to remove the EGR valve on a Peugeot Boxer 2.2 HDI, as well as on a Fiat Ducato with the same engine. First, open the …
Replacement of the EGR valve on Peugeot Boxer
Replacement of the EGR valve on Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) Let's see how to replace the EGR valve on a Peugeot Boxer that gives us a slow response from the accelerator, especially when releasing and pressing …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos