Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the drain valve on the Peugeot 508.

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Valve

See other generations:
Video tutorial

In this video, we can see how to replace the wastegate valve, which serves to protect the turbocharger and improve performance by releasing excess air, thus preventing the turbo from slowing down too much. In both gasoline and diesel engines, the wastegate valve (also known as "wastegate") regulates the turbo pressure by diverting exhaust gases away from the turbine to control the boost.

In gasoline engines, the valve is integrated into the turbo, so you just need to remove the screws that hold it in place and take it out. If the valve gets stuck or leaks, the turbo won't maintain boost. Codes such as P2263 may appear in the ECU, indicating that the turbo is under or over-pressurized.


Posted on 30 December 2025 by ScegliAuto


Related tutorials

Replacing the Thermostat on a Peugeot 508
Replacing the Thermostat on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Removing the thermostat on a Peugeot 508? Open and lift the front bonnet, remove the covering plastics. Unscrew the bolts on the thermostat hose cap …
Replacing the Key Battery for the Peugeot 508
Replacing the Key Battery for the Peugeot 508
Peugeot 508 (2018-2026 / MK 2) In this short video, you will see how to replace the battery in the remote key of a Peugeot 508. This tutorial is also valid for other car models tha…
How do you reset the AdBlue warning light on the Peugeot 508?
How do you reset the AdBlue warning light on the Peugeot 508?
Peugeot 508 (2018-2026 / MK 2) To make the AdBlue warning light disappear from the instrument panel of the Peugeot 508, it will be necessary to top up the additional liquid inside …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos