Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you adjust the valves of the Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Valve

In order to adjust the valves of the Peugeot 206, you need to open the hood so that you can access the components located inside the engine compartment: here you will be able to locate the valve cover on the top of the engine block. This cover must be removed by loosening the screws, allowing access to the valves underneath. To adjust the clearance, you will need to use a feeler gauge and follow the optimal values indicated in the manual; once the adjustment is done, you can cover everything again by reinstalling the cover.

Posted on 1 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant in a Peugeot 206?
How to Replace the Coolant in a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In this tutorial, you will learn how to replace the coolant in a Peugeot 206. Before proceeding, wait for the engine to cool completely; otherwise, y…
Where are the Fuses on the Peugeot 206?
Where are the Fuses on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) All the appropriate fuse boxes installed on the Peugeot 206 contain the fuses that regulate the operation of the devices present in the vehicle. In t…
How to Install the Cylinder Head on the Peugeot 206
How to Install the Cylinder Head on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Below are the main instructions that will allow you to install the cylinder head on the engine block of the Peugeot 206. In this case, the installati…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos