Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Light Bulb on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Headlight bulb

Replacing the front light bulb on a Peugeot 206 is a straightforward task that you can easily do yourself, especially with the help of our video tutorial that illustrates the steps to follow. The first step is to lift the front bonnet and slightly move the air duct, then use a Torx key to remove the bolt securing the ventilation block. Once the block is removed, disconnect the power cable for the valves, which is located at the bottom and is red. Unscrew the bulb cover and disconnect the connectors. Remove the faulty bulb and insert the new one. Once everything is reconnected, close the bonnet.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of a Peugeot 206
How to Remove the Front Door Panel of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let's see in this short and simple guide how to remove the front door panel of a Peugeot 206. First, open the front door and start by removing the tr…
Removing the Door Panel and Hinge of the Peugeot 206
Removing the Door Panel and Hinge of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This guide shows you how to remove and replace the front door panel and door hinge of the Peugeot 206. First, open the front door and start unscrewin…
How to Replace the Front Door of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the front door of a Peugeot 206, open the door and disconnect the connector located between the two hinges. Once the connector is disconne…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos