Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the intake pipe of the THP turbine on a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Turbocharger

See other generations:
Video tutorial

In this video, instructions are given for replacing the suction tube of the turbine, which tends to crack near the clamps on a THP engine, and avoid serious damage. First, we remove the connectors from the small tube (pressure valve), then with a thin screwdriver we remove the electrical sensor; loosen the clamps and remove the old cracked tube, making sure that no fragments have entered the turbine; insert the pressure valve, connect the new tube to the turbine, making sure it is properly positioned before tightening the clamp; reconnect the connectors, pushing until you hear a click; tighten the clamps without over-tightening to avoid deforming the tube.

Then we do a check by starting the engine and checking for any abnormal noises: whistles indicate an air leak.


Posted on 13 August 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Peugeot 2008
How to Replace the Air Filter on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) To replace the air filter on a Peugeot 2008 model 1, you need to: - open the front bonnet; - cover the external bodywork with a cloth; - disconnect t…
Air filter replacement on Peugeot 2008 MK2
Air filter replacement on Peugeot 2008 MK2
Peugeot 2008 (2019-2026 / MK 2) To replace the air filter that feeds the engine of the Peugeot 2008, we open the front hood and lock it with its rod. We remove the plastic cover in …
How to Change the Language of the Menu on the Peugeot 2008
How to Change the Language of the Menu on the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Below are the instructions that will allow you to change the language of the main menu on the Peugeot 2008. First, get in the vehicle and turn on the…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos