Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the third stop light of the Peugeot 2008 MK2

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part:

To disassemble the third brake light of the Peugeot 2008, we open the rear hatch, release the top part of the plastic frame of the rear window, unscrew the four screws that are exposed, remove the side frames and unscrew the screws underneath. Temporarily close the hatch to be able to release the spoiler, disconnect the electrical connector, use a socket wrench with an extension to unscrew the bolts that secure the third light, open the hatch and disconnect the rear window washer tube, close the hatch and remove the third brake light.

Posted on 25 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the third brake light on the Peugeot 2008 MK1
How to replace the third brake light on the Peugeot 2008 MK1
Peugeot 2008 (2013-2019 / MK 1) Removing the third stop light from a Peugeot 2008 is not very easy, but it is definitely something that can be done: we open the rear hatch and remov…
How to Repair the Third Brake Light on a Peugeot 2008
How to Repair the Third Brake Light on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) The bulbs for the third brake light located at the centre of the upper trim of the rear hatch are already of the LED type. To replace them, you essen…
How to activate and deactivate the Start&Stop of the Peugeot 2008
How to activate and deactivate the Start&Stop of the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) This short guide will show us the instructions on how to activate and deactivate the Start&Stop system of the Peugeot 2008, following the instruction…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos