Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Peugeot 2008 -

Peugeot 2008 (2019-2026 / mk 2)

Peugeot 2008 (2019-2026 / MK 2)
Disassembly of the third stop light of the Peugeot 2008 MK2
To disassemble the third brake light of the Peugeot 2008, we open the rear hatch, release the top part of the plastic frame of the rear window, unscrew the …Read all…
Posted on 25 December 2024 by ScegliAuto
Peugeot 2008 (2013-2019 / MK 1)
How to replace the third brake light on the Peugeot 2008 MK1
Removing the third stop light from a Peugeot 2008 is not very easy, but it is definitely something that can be done: we open the rear hatch and remove the …Read all…
Posted on 10 September 2024 by ScegliAuto
Peugeot 2008 (2013-2019 / MK 1)
How to Repair the Third Brake Light on a Peugeot 2008
The bulbs for the third brake light located at the centre of the upper trim of the rear hatch are already of the LED type. To replace them, you essentially …Read all…
Posted on 9 March 2026 by ScegliAuto

Peugeot 2008 (2013-2019 / mk 1)

Peugeot 2008 (2019-2026 / MK 2)
Disassembly of the third stop light of the Peugeot 2008 MK2
To disassemble the third brake light of the Peugeot 2008, we open the rear hatch, release the top part of the plastic frame of the rear window, unscrew the …Read all…
Posted on 25 December 2024 by ScegliAuto
Peugeot 2008 (2013-2019 / MK 1)
How to replace the third brake light on the Peugeot 2008 MK1
Removing the third stop light from a Peugeot 2008 is not very easy, but it is definitely something that can be done: we open the rear hatch and remove the …Read all…
Posted on 10 September 2024 by ScegliAuto
Peugeot 2008 (2013-2019 / MK 1)
How to Repair the Third Brake Light on a Peugeot 2008
The bulbs for the third brake light located at the centre of the upper trim of the rear hatch are already of the LED type. To replace them, you essentially …Read all…
Posted on 9 March 2026 by ScegliAuto
Airbag (1) Car stereo (17) Battery (14) Ignition coil (1) Spark plugs (1) Glow plugs (1) Body (5) Control unit (1) Key (12) Timing belt (8) V-belt (1) Onboard computer (27) Checks and maintenance (42) Rear bench seat (3) Headlight (2) Tail light (5) Fog lights (1) Air filter (8) Cabin air filter (22) Diesel fuel filter (5) Oil filter (3) Parking brake (1) Light bulb (3) Headlight bulb (14) Tail light bulb (2) Interior dome light bulb (1) Instrument panel light (1) (3) Engine (1) Engine oil (5) Clock (19) Door trim panel (9) Front bumper (2) Rear bumper (1) Brake pads (3) Tires (1) Instrument cluster (12) Wheel (3) Fuse box (26) Side mirror (11) Rearview mirror (1) AdBlue warning light (10) Warning light – error code (16) (37) Tire pressure warning light (8) Service warning light (98) Windshield wipers (3) Tie rods (1) Turbocharger (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos