Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. Peugeot 2008
  6. : Turbocharger

Peugeot 2008 - Turbocharger

Turbocharger Peugeot 2008 (2013-2019 / mk 1)

Peugeot 2008 (2013-2019 / MK 1)
How to change the intake pipe of the THP turbine on a Peugeot 2008

In this video, instructions are given for replacing the suction tube of the turbine, which tends to crack near the clamps on a THP engine, and avoid serious …Read all…
Posted on 13 August 2025 by ScegliAuto

Airbag (1) Car stereo (17) Battery (14) Ignition coil (1) Spark plugs (1) Glow plugs (1) Body (5) Control unit (1) Key (12) Timing belt (8) V-belt (1) Onboard computer (27) Checks and maintenance (42) Rear bench seat (3) Headlight (2) Tail light (5) Fog lights (1) Air filter (8) Cabin air filter (22) Diesel fuel filter (5) Oil filter (3) Parking brake (1) Light bulb (3) Headlight bulb (14) Tail light bulb (2) Interior dome light bulb (1) Instrument panel light (1) (3) Engine (1) Engine oil (5) Clock (19) Door trim panel (9) Front bumper (2) Rear bumper (1) Brake pads (3) Tires (1) Instrument cluster (12) Wheel (3) Fuse box (26) Side mirror (11) Rearview mirror (1) AdBlue warning light (10) Warning light – error code (16) (37) Tire pressure warning light (8) Service warning light (98) Windshield wipers (3) Tie rods (1) Turbocharger (1) Blower motor (1)

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos