Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Peugeot 2008
    4. : Glow plugs

Peugeot 2008 - Glow plugs

Glow Plugs Peugeot 2008 (2013-2019 / mk 1)

Peugeot 2008 (2013-2019 / MK 1)
How to replace the glow plugs in the Peugeot 2008?
In this tutorial, you will see how to replace the glow plugs in the Peugeot 2008, a relatively simple operation. First, ensure the engine is cold, then open …Read all…
Posted on 25 July 2026 by ScegliAuto
Airbag (1) Car stereo (17) Battery (14) Ignition coil (1) Spark plugs (1) Glow plugs (1) Body (5) Control unit (1) Key (12) Timing belt (8) V-belt (1) Onboard computer (27) Checks and maintenance (42) Rear bench seat (3) Headlight (2) Tail light (5) Fog lights (1) Air filter (8) Cabin air filter (22) Diesel fuel filter (5) Oil filter (3) Parking brake (1) Light bulb (3) Headlight bulb (14) Tail light bulb (2) Interior dome light bulb (1) Instrument panel light (1) (3) Engine (1) Engine oil (5) Clock (19) Door trim panel (9) Front bumper (2) Rear bumper (1) Brake pads (3) Tires (1) Instrument cluster (12) Wheel (3) Fuse box (26) Side mirror (11) Rearview mirror (1) AdBlue warning light (10) Warning light – error code (16) (37) Tire pressure warning light (8) Service warning light (98) Windshield wipers (3) Tie rods (1) Turbocharger (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos