Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. Peugeot 2008
  6. : Windshield wipers

Peugeot 2008 - Windshield wipers

Windshield Wipers Peugeot 2008 (2019-2026 / mk 2)

Peugeot 2008 (2019-2026 / MK 2)
How to Replace the Front Wipers on the Peugeot 2008?

In this tutorial, we will see how to replace the front wipers on the Peugeot 2008, a very simple and quick operation. First, go inside the cabin, then turn on …Read all…
Posted on 19 May 2026 by ScegliAuto
Peugeot 2008 (2019-2026 / MK 2)
In the second series Peugeot 3008, how do you replace the rear windshield wiper?

It should be noted that the video guide presented here was made using the Peugeot 2008 second series, but it is also suitable for the Peugeot 3008 second …Read all…
Posted on 3 October 2025 by ScegliAuto
Peugeot 2008 (2019-2026 / MK 2)
How to Replace the Front Wiper Blades

Replacing the front wiper blades is a very simple task that takes only a few minutes. With the help of this video tutorial, you will learn how and when to …Read all…
Posted on 15 October 2026 by ScegliAuto

Airbag (1) Car stereo (18) Battery (16) Ignition coil (1) Spark plugs (1) Glow plugs (1) Body (5) Control unit (1) Key (13) Timing belt (8) V-belt (1) A/C controls (1) Onboard computer (30) Checks and maintenance (44) Rear bench seat (3) Headlight (2) Tail light (5) Fog lights (1) Air filter (8) Cabin air filter (24) Diesel fuel filter (5) Oil filter (3) Parking brake (1) Light bulb (3) Headlight bulb (14) Tail light bulb (2) Interior dome light bulb (1) Instrument panel light (1) (3) Engine (1) Engine oil (5) Clock (19) Door trim panel (9) Front bumper (2) Rear bumper (1) Brake pads (4) Tires (1) Instrument cluster (12) Wheel (3) Fuse box (27) Side mirror (12) Rearview mirror (1) AdBlue warning light (10) Warning light – error code (16) (1) Tire pressure warning light (46) Service warning light (102) Windshield wipers (3) Tie rods (1) Turbocharger (1) Blower motor (1)

How to Program the Smart Key?

To program the Smart key, you must use a diagnostic tool: insert the key into the ignition switch located on the central tunnel, then connect the scanner to the vehicle's OBD port. Here, select the relevant car model and its corresponding version, following all instructions in the user and maintenance manual. Once the operation is complete, disconnect the scanner from the port and check that the key functions correctly.

Watch the video!


by ScegliAuto

More videos