Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How to replace the front windshield wiper blades

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 2 - Years 2019-2024
Part: Windscreen wipers
Operation: How to replace the front windshield wiper blades

Replacing the front windshield wiper blades is a very simple operation that takes only a few minutes. With the help of this video tutorial, we will explain how and when to replace them. The first thing to do is to press the start button without turning on the car, then push down the windshield wiper lever. This action is very important because it allows us to position the wipers vertically, making it easier to replace them. Now lift the wiper arm and press the small button on the surface to remove the blade. Take the new blade and simply snap it into place. Lower the right wiper and repeat the same operation with the left one. The last steps to be performed are to press the start button on the dashboard, turn off the dashboard, and lower the windshield wiper lever.


Posted on 8 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos