Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Peugeot 2008
    4. : Front bumper

Peugeot 2008 - Front bumper

Front Bumper Peugeot 2008 (2013-2019 / mk 1)

Peugeot 2008 (2013-2019 / MK 1)
Removing and Replacing the Front Bumper on a Peugeot 2008
The main instructions in this guide will show you how to remove and replace the front bumper on a Peugeot 2008. First, open the bonnet of the vehicle and start …Read all…
Posted on 30 May 2026 by ScegliAuto
Peugeot 2008 (2013-2019 / MK 1)
How to Remove the Front Bumper of a Peugeot 2008
Today, we will look at the necessary information for removing and replacing the front bumper of a Peugeot 2008. First, open the bonnet and start removing all …Read all…
Posted on 25 September 2026 by ScegliAuto
Airbag (1) Car stereo (17) Battery (14) Ignition coil (1) Spark plugs (1) Glow plugs (1) Body (5) Control unit (1) Key (12) Timing belt (8) V-belt (1) Onboard computer (27) Checks and maintenance (43) Rear bench seat (3) Headlight (2) Tail light (5) Fog lights (1) Air filter (8) Cabin air filter (22) Diesel fuel filter (5) Oil filter (3) Parking brake (1) Light bulb (3) Headlight bulb (14) Tail light bulb (2) Interior dome light bulb (1) Instrument panel light (1) (3) Engine (1) Engine oil (5) Clock (19) Door trim panel (9) Front bumper (2) Rear bumper (1) Brake pads (3) Tires (1) Instrument cluster (12) Wheel (3) Fuse box (27) Side mirror (11) Rearview mirror (1) AdBlue warning light (10) Warning light – error code (16) (37) Tire pressure warning light (8) Service warning light (99) Windshield wipers (3) Tie rods (1) Turbocharger (1) Blower motor (1)

How to reset the tyre pressure warning light on the Citroën DS4?

The tyre pressure warning light on the Citroën DS4 can be reset by inflating the tyres until they reach the corresponding pressure value, which is indicated on the sticker attached to the driver's door pillar. Once all tyres are at this value, turn on the ignition by inserting the key into the ignition switch; this should make the warning light disappear from the dashboard. If it does not reset, start the engine and drive to allow the sensors to read the new values.

Watch the video!


by ScegliAuto

More videos