Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing the Front Bumper on a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

The main instructions in this guide will show you how to remove and replace the front bumper on a Peugeot 2008. First, open the bonnet of the vehicle and start unscrewing all the fixing screws found above and below the bumper; then unscrew the additional screws located on both sides of the front wheel arches, detaching the plastic trims as shown in the video.

At this point, lever on the sides to gently detach the bumper, replacing it with a new one if necessary; secure the new front bumper correctly!


Posted on 30 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of a Peugeot 2008
How to Remove the Front Bumper of a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Today, we will look at the necessary information for removing and replacing the front bumper of a Peugeot 2008. First, open the bonnet and start remo…
How to remove the rear bumper from the Peugeot 2008?
How to remove the rear bumper from the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) For those with good manual skills, the task described is certainly manageable without great difficulty. The vehicle on which the bumper removal is pe…
How to disassemble the front headlight of the Peugeot 2008
How to disassemble the front headlight of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Today's instructions will show us how to disassemble and replace the front headlight of the Peugeot 2008, in simple steps. First, we open the hood of…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos