Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

Today, we will look at the necessary information for removing and replacing the front bumper of a Peugeot 2008. First, open the bonnet and start removing all the plastic clips located at the top and bottom of the bumper. Then, remove any additional clips and unscrew the bolts to gently detach the bumper from the sides until it is completely removed, as shown in the video.

This way, you can proceed to replace the headlight assembly if necessary; then refit the front bumper by reversing the disassembly procedure!


Updated on 24 September 2026 by ScegliAuto


Related tutorials

Removing and Replacing the Front Bumper on a Peugeot 2008
Removing and Replacing the Front Bumper on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) The main instructions in this guide will show you how to remove and replace the front bumper on a Peugeot 2008. First, open the bonnet of the vehicle…
How to remove the rear bumper from the Peugeot 2008?
How to remove the rear bumper from the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) For those with good manual skills, the task described is certainly manageable without great difficulty. The vehicle on which the bumper removal is pe…
How to disassemble the front headlight of the Peugeot 2008
How to disassemble the front headlight of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Today's instructions will show us how to disassemble and replace the front headlight of the Peugeot 2008, in simple steps. First, we open the hood of…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos