Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Bumper and Front Headlight of the Peugeot 5008

Model: Peugeot 5008 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Front bumper

See other generations:
Video tutorial

Today, learn how to remove the front bumper of the Peugeot 5008 to replace the front headlight. Open the front bonnet and using an 18 mm socket, undo the nuts located at the front of the bumper.

Using a 12 mm socket, undo the nuts in the wheel arch to detach the sides of the bumper. Using a 20 mm socket, undo the nuts at the bottom of the bumper to remove it, taking care not to damage the clips and central connector.

Once the bumper is removed, undo the screws securing the headlight to the vehicle using an 18 mm socket. Remove the headlight and disconnect the cover cap to replace the bulb.


Posted on 3 November 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Peugeot 5008?
Peugeot 5008 (2009-2016 / MK 1) To remove the front bumper of the Peugeot 5008, open the bonnet to access the screws securing the bumper from the top; once these are undone, access …
Guide to Removing the Front Bumper on the Peugeot 5008
Guide to Removing the Front Bumper on the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) In this video tutorial, learn how to remove and replace the front bumper on the Peugeot 5008, as well as the 3008. First, open the bonnet and start r…
How to Remove the Front Headlight of the Peugeot 5008
How to Remove the Front Headlight of the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) In this guide, we will see the main instructions that will allow us to remove and replace the front headlight of the Peugeot 5008. First, open the ve…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos