Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Chrome Trim on the Grille and Replacing the Front Headlamp Bulb

Model: Peugeot 5008 MK 1 - Years 2009-2016
Part: Headlight

To insert the chrome trim at the bottom of the car's grille, you must first remove the grille itself. Unscrew the screws securing the grille to the bodywork. Once removed, position the chrome trim and drill a hole in the bodywork corresponding to the hole in the new chrome part, where a fastener will be inserted to secure it to the bodywork. To replace the headlamp bulb, disconnect the electrical connectors and unscrew the screws securing it to the bodywork. Once disassembled, open the bulb compartment cover. If the wires are too long or connected poorly, you can improve this by removing a multi-connector and replacing it with a direct soldering to the ends of the wires. Once the wires are sorted, replace the bulb by releasing the spring that holds it to the headlamp frame and reconnect it to the connectors.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Peugeot 5008
How to replace the front headlight bulb of the Peugeot 5008
Peugeot 5008 (2017-2024 / MK 2) Today we will see how to replace the headlight bulb of the Peugeot 5008 model 2. To perform the replacement of the bulb, we must purchase a 55 Watt h…
How to replace the headlight bulb of the Peugeot 5008
How to replace the headlight bulb of the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) Today we will explain how to replace the front headlight bulb of the 2016 Peugeot 5008. This operation can be done independently by following the ins…
Replacing the Front Headlight Bulb on a Peugeot 5008
Replacing the Front Headlight Bulb on a Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) The following instructions will allow you to remove and replace the dipped or main beam bulb of the front headlight on a Peugeot 5008. First, open th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos