Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Peugeot 5008?

Model: Peugeot 5008 MK 1 - Years 2009-2016
Part: Rear bumper

To remove the front bumper of the Peugeot 5008, open the bonnet to access the screws securing the bumper from the top; once these are undone, access the underside of the bumper to remove the screws located there. Next, loosen the screws found inside the wheel arches of the front wheels to fully free the bumper; after removal, disconnect the old bumper from the connectors underneath, then connect and install the new one.

Updated on 19 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Guide to disassembling the front bumper of the Peugeot 5008
Guide to disassembling the front bumper of the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) In this video tutorial, we will see how to disassemble and replace the front bumper of the Peugeot 5008, but also of the 3008. First, we open the hoo…
Removing the Rear Bumper of the Peugeot 5008
Removing the Rear Bumper of the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) Below are the instructions on how to remove and replace the rear bumper of the Peugeot 5008. First, move to the rear of the vehicle and start unscrew…
How to Remove the Front Headlight of the Peugeot 5008
How to Remove the Front Headlight of the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) In this guide, we will see the main instructions that will allow us to remove and replace the front headlight of the Peugeot 5008. First, open the ve…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos