Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 5008
    4. : Rear bumper

Peugeot 5008 - Rear bumper

Rear Bumper Peugeot 5008 (2009-2016 / mk 1)

Peugeot 5008 (2009-2016 / MK 1)
Removing the Rear Bumper of the Peugeot 5008
Below are the instructions on how to remove and replace the rear bumper of the Peugeot 5008. First, move to the rear of the vehicle and start unscrewing all …Read all…
Posted on 4 September 2026 by ScegliAuto
Peugeot 5008 (2009-2016 / MK 1)
How to Remove the Front Bumper of the Peugeot 5008?
To remove the front bumper of the Peugeot 5008, open the bonnet to access the screws securing the bumper from the top; once these are undone, access the …Read all…
Posted on 29 August 2026 by ScegliAuto
Airbag (2) Shocks (1) Antenna (1) Car stereo (6) Roof rack bars (1) Battery (14) Transmission (1) Body (3) Key (10) Timing belt (6) Air conditioner (1) Onboard computer (5) Checks and maintenance (17) Dashboard (3) Headlight (2) Tail light (2) Fog lights (2) Air filter (5) Cabin air filter (15) Diesel fuel filter (4) Parking brake (3) Clutch (2) Grille (1) Light bulb (1) Headlight bulb (19) Tail light bulb (3) Instrument panel light (1) License plate light (1) Engine (1) Transmission fluid (2) Engine oil (3) Clock (6) Door trim panel (2) Front bumper (1) Rear bumper (2) Brake pads (5) Shift knob (1) Instrument cluster (4) Wheel (7) Fuse box (40) Seat (8) Side mirror (4) AdBlue warning light (5) Warning light – error code (4) (17) Tire pressure warning light (6) Service warning light (49) Windshield wipers (1) Blower motor (4)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos