Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 5008
    4. : Door trim panel

Peugeot 5008 - Door trim panel

Door Trim Panel Peugeot 5008 (2009-2016 / mk 1)

Peugeot 5008 (2009-2016 / MK 1)
How to remove the front door panel of a Peugeot 5008 MK1
Let's see how to remove the inner panel from the front door of a Peugeot 50058 MK1: first, we need to remove the window switch by taking off the cover located …Read all…
Posted on 11 January 2026 by ScegliAuto
Peugeot 5008 (2009-2016 / MK 1)
How to Remove the Door Panel of the Peugeot 5008
To remove the door panel of the Peugeot 5008, you need to loosen the bolts that secure the panel in its housing: these are located just below the armrest. The …Read all…
Posted on 23 September 2026 by ScegliAuto
Airbag (2) Shocks (1) Antenna (1) Car stereo (6) Roof rack bars (1) Battery (14) Transmission (1) Body (3) Key (10) Timing belt (6) Air conditioner (1) Onboard computer (5) Checks and maintenance (17) Dashboard (3) Headlight (2) Tail light (2) Fog lights (2) Air filter (5) Cabin air filter (15) Diesel fuel filter (4) Parking brake (3) Clutch (2) Grille (1) Light bulb (1) Headlight bulb (19) Tail light bulb (3) Instrument panel light (1) License plate light (1) Engine (1) Transmission fluid (2) Engine oil (3) Clock (6) Door trim panel (2) Front bumper (1) Rear bumper (2) Brake pads (5) Shift knob (1) Instrument cluster (4) Wheel (7) Fuse box (40) Seat (8) Side mirror (4) AdBlue warning light (5) Warning light – error code (4) (17) Tire pressure warning light (6) Service warning light (49) Windshield wipers (1) Blower motor (4)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos